INTERIOR

Doors and Handles

Situation Notes: This area covers the nature strip, footpath and are at the front boundary of the property
Issue
Possible Causes
Remedy
Payment
Photos
References
Door Lock Doesn’t latch properly
Latch and the strike plate are out of alignment
Tighten the hinge screws and then try adjusting the strike plate by loosening its screws and shifting it slightly
https://bit.ly/3QXcfuZ
Door Knob Is loose
Buildup of Dirt, dust and other pollutants
Tighten simple interior mortise lockset
Door Lock is Frozen or Works Slowly
Weather -moisture in the lock freezes and jams the locking mechanism in place
Put some graphite into the keyhole, either by squeezing it from a tube or dusting it onto a key, and then operate the lock a few times to work the graphite into the mechanism.
Entire Lock Cylinder Turns
Deadbolt (atuator) has broken or become detached
Remove the faceplate (if there is one) at the door’s edge and locate the one or two cylinder setscrews.
Deadbolt is stuck
Parts inside it have disengaged
Shot of dry Teflon spray will fix a jammed door lock and keep the bolt operating smoothly
Parts inside it have disengaged
Shot of dry Teflon spray will fix a jammed door lock and keep the bolt operating smoothly
Key Is Broken Off in Lock
Normal wear and tear on the key
Try to grip and pull the key straight out